How to customized CM4IO (Compute Module 4 IO Board) board using kiCad?
Raspberry Pi foundation release CM4 a few days ago and the most exciting thing to
Nicho
Seeed Arch Series Dev. Board | More than an MCU
When building a data node, it usually needs to include three parts： MCU Data transceiver
Which is best? RFID/NFC/Mifare chip selection Guide – RC522 vs PN532
Simply put, the protocol supports more types of PN than the RC series. PN supports
5 uses of 0Ω resistor you should know
Zero-ohm resistors, also known as jumper resistors, are a kind of special-purpose resistors. The zero-ohm
The life cycle of SMD resistor and something you should consider
In general, the failure rate of resistors is relatively large compared to other devices, so
76.8 Times Smaller than 0805 – Take a Look at 008004
Murata Manufacturing Co., Ltd. started mass production of multilayer ceramic capacitors with the smallest size
TinyUSB is Awesome! And tutorial about how to use it in SAMD21 board
Unlike the Arduino Uno and Arduino Nano, the Seeeduino XIAO onboard USB is not supported
Use Seeeduino XIAO in Kicad PCB Design Like a Components
The half-hole design of Seeeduino XIAO is for soldering directly on the PCB, no connectors
4 reason we use USB-TYPE-C in new PCB design
After the launch of the Raspberry Pi, USB-C has appeared more and more in open
Two PCIe-to-USB bridge chip solution to use NVMe SSD on your Raspberry Pi 4
As we all know that one of the important improvements in Raspberry Pi 4 is
How to Overcome the Disadvantages using Different CO2 sensors
If you want to measure the concentration of Carbon Dioxide in the air at home